Verex Monitor ISM Instrukcja Użytkownika Pobierz pdf (Strona 13)

ISM System

Wireless 433 MHz

These versatile devices have a programmable Wiegand output, enabling you to control

different devices or input points. They feature rolling code technology to ensure secure

communications at all times.

The transmitters come in 2 or 4 button configurations, and each button can be

independently programmed. Furthermore, a G-Prox II chip can be embedded in either

model to provide a seamless wireless transmitter plus proximity solution.

By programming two receivers to obtain signals from two different buttons on the same

transmitter, you can easily set up access control + panic applications, in/out access

control, or a host of other applications.

Order-No. 120-0853

Order-No. 120-0850 433 MHz Wireless Receiver with Wiegand output

433Mhz Wireless Receiver with “rolling code” technology and Wiegand

output. Can be used as a standalone unit for panic and O/H door

applications. Supports an onboard output relay. Also used as an on-line

Wireless Wiegand reader for access control and panic applications when

connected to the MONITOR system. Each receiver has dip switch setting

to support custom configuration. This allows a receiver to block out the

reception of specific buttons from the transmitters; thereby supporting

multiple applications with the use of a single Wiegand number. Use with

the 120-0852, 120-0853, 120-0854 and 120-0855 transmitters.

Order-No. 120-0854 Wireless 4 button FOB, Programmable Wiegand Output

4 Button transmitter with “rolling code” technology, for use with 433Mhz

Receiver (120-0850). Each button can be configured separately e.g. Panic,

O/H door access control, man door access control, medical. All buttons

are programmed to send the same wiegand code.

Order-No. 120-0852 Wireless 2 button FOB, Programmable Wiegand Output

2 Button transmitter with “rolling code” technology, for use with 433Mhz

Receiver (120-0850). Each button can be configured separately e.g. one is

used for Panic and the other is used for O/H door access control. All

buttons are programmed to send the same wiegand code.

Wireless 2 button FOB, w/ VEREX G-Prox II Chip, Programmable

Wiegand Output

2 Button transmitter with “rolling code” technology, with built-in GProx II

chip for use with 433Mhz Receiver (120-0850). Provides the ability for one

token (with one wiegand o/p) to be used for both the Wireless Wiegand

receivers and the hardwired GProx II readers. Combines O/H door, panic

and proximity controlled door applications with a single token. All buttons

and the GProx II chip are programmed to send the same wiegand code.

13 Fax No.:+41 91 960 17 40

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Brak uwag

Verex Monitor ISM Instrukcja Użytkownika Strona 13