Verex MONITOR AFx Podręcznik Użytkownika Pobierz pdf (Strona 195)

500-9041 v4.1

Welcome Report Control Admin

Sys Config

Tech-Ref

189

Pick-Lists

(bottom of the Form)

-Panel Group

Panel

references (optional)

This is where you select a specific panel-

group and panel in a multi-panel system

where the 'tree' is

not

set to show items on

a panel-by-panel basis. For more

information on this feature, refer to "Other

Desktop Choices".

- Module:

This is where you select a

module to view or edit. This area

shows a reference number assigned

by the system, and the name of the

selected module, once defined;

Top of the Form

- Name:

A suitable name / location for the module

(up to 30 characters).



Standard



-Serial Number:

The actual serial number of the

expansion module.

Tip:

The serial number is

typically hand-written (5 digits) on a small sticker

on the circuit board.

Converted TDC/PDC Door Controllers: Enter the

'address' of the door controller (as set via jumpers or

switches on the board).

- Monitor Communications and Tamper

Sensors:

Whether or not module communi-

cations, and the module housing tamper sensor

are to be monitored (recommended);

Module Type

This area allows selecting the type of module

you are setting up.

Tip: During each communications session with the

panel, the module types are checked and displayed

here as well.



I/O



(for modules that support inputs and outputs)

- Inputs:

The number of input points (monitored

sensors) supported by this module;

Note:

The first 3 inputs on a system LCD keypad

pertain to the built-in emergency keys rather than

external sensors.

- Outputs:

The number of outputs

(programmable electronic switches) on the

device;

Note:

Outputs on a "Map" module pertain to firing the

LEDs on the module itself rather than triggering

external devices.

-------------------------

- Input Range:

The input point numbers to be

associated with this expansion module.

- Output Range:

The range of programmable

output-point numbers to be associated with this

expansion module.

Input and Output Range: The Number-Range for inputs

& outputs is based on the number of inputs and outputs

supported by each module, and the order the modules

are installed--plus the "Display Offset" settings for the

specific panel. For details on the "Display Offset"

value, refer to "System Panels and Displayed Item-

Numbers".



Keypad

(settings for LCD Keypads)



- Assigned to Area:

The 'area' that this keypad is

associated with;

- Exit Delay When Arming:

Whether or not an

exit delay is to be in effect when arming the

keypad's area to 'Stay' and/or 'On'. (Arming any

other areas from this keypad will be immediate).

'Stay' pertains to 'perimeter' sensors being monitored,

and 'On' pertains to all sensors in the area being

monitored.

- Entry and Exit Tones on Stay Mode:

Whether

or not Entry/Exit tones are to be sounded at this

keypad while the associated area is set to the

STAY arming level.

- Annunciation (List of Areas):

This portion of

the screen allows selecting the area(s) to be

monitored by this keypad (i.e., the areas for

which any associated alarms will be signalled at

the sonalert built into this keypad).

Configuration Modules

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 323 324

Komentarze do niniejszej Instrukcji

Brak uwag

Verex MONITOR AFx Podręcznik Użytkownika Strona 195

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Verex MONITOR AFx