Verex MONITOR AFx Podręcznik Użytkownika Pobierz pdf (Strona 203)

500-9041 v4.1

Welcome Report Control Admin

Sys Config

Tech-Ref

197

Unlock Time

- Standard:

This is the duration that the door will

unlock when access is granted for a typical

entrant/user.

- Challenged/Extended:

This is the duration that

the door will unlock when access is granted for a

user who is set for "Extended

Delay/Challenged".

Auto Unlock

- Schedule / "In Schedule" / "Out of

Schedule":

The schedule and conditions

required for the door to unlock automatically

based on a schedule.

If a schedule is selected, the times 'Outside' of the

schedule are treated in a similar manner to 'Inside' of

the schedule. (For example: You can have the door

unlocked inside of the active schedule, and also

unlocked after-hours, but only if/when the area is also

disarmed.)

To have the door simply re-lock at the closing time, set

the "In Schedule" value as desired, and set the "Out of

Schedule" value to "

Locked

To have the door unlocking follow the area arming-

state only, set the schedule to "

None

", and "In

Schedule" to either "

Area is Off

", or "

Area is

Stay/Off

", as desired.

If you do

not

want the door to unlock automatically

based on a schedule and/or the area arming-state, set

the "Schedule" to "

None

", and the 'In Schedule' value

to "

Locked

Circuit

With converted TDC/PDC door controllers, this setting

does not apply.

- Reader Tamper Circuit:

This is the type of

circuit/wiring used with the reader tamper circuit

for this door.

Not Required: This disables the reader tamper input

(i.e., the tamper input will not be monitored).

Converted TDC/PDC Door Controllers: These units

do not support dedicated/separate reader tamper

monitoring.

- Door Circuit:

This is the type of circuit/wiring

used with the door contact for this door.

Other

- Door Arming Level:

The area arming levels

for which the door is to be monitored.

Tip:

You may wish to use "Stay and On" with doors

used to enter the facility, and "On Only" for all doors

within the facility.

- Bi-Colour LED Mode:

Select this if the reader

at this door has a single bi-colour LED (instead

of the two separate LEDs). This setting

must

also be used if an 'arming station' is present.

Note:

Arming-station wiring differs from other readers

(ensure the proper installation instructions have been

followed).



Extended



1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 323 324

Komentarze do niniejszej Instrukcji

Brak uwag

Verex MONITOR AFx Podręcznik Użytkownika Strona 203

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Verex MONITOR AFx